Dubans Construction Chemical

Plasticising and slump retention admixture for concreting in temperate zone 

Description:

• Perma Plast PC -200 is a medium range plasticizing and slum retaining admixture of use in temperate zones where workability retention is important on concreting sites. Perma Plast PC -200 is recommended in all general concreting.

• Perma Plast PC -200 is recommended in all general concreting in elevated temperatures and in areas slump retention is desired.
• Perma Plast PC -200 is recommended in hot weather concreting where workability retention over long periods are required.
• Perma Plast PC -200 is recommended in pile foundations, bridge girders, caissons high rise structures and such structures where quality of concrete is of prime importance.

Advantages:

• Perma Plast PC-200 is suitable for use with all types aggregates and cements.
• Perma Plast PC-200 maintains the workability over long periods.
• Perma Plast PC-200 helps in production of good quality of concrete continuously.
• Perma Plast PC -200 is compatible with all types of cements including puzzolonic and fly ash / slag cements.
• Perma Plast PC-200 is specially suggested in all high strength concrete and in construction of marine structures, pile foundations and bridge girders.
• Perma Plast PC-200 enables production of dense impermeable and fair finish concrete.

Directions for Use:

• Perma Plast PC -200 should be added to the mix along with water. Addition of plasticizers to the dry mix or dry cement should be avoided. During long transits of concrete fifty percent of the recommended dosage of Perma Plast PC-200 can be added at the batching plant and the remaining fifty percent at site just before pouring.

Also Available Packing :

• Perma Plast PC-200 is available in 100Kg and 200 Kg drum.

Description:

• Perma Plast PC – 300 is based on Polycarboxylic ether and synthetic polymers. It may be dispensed at dosages varying between to 0.6 to 2 percent by weight of cement depending upon type of concrete required.

• Perma Plast PC – 300 is recommended in all high grade concrete which has a cement. content of over 375 kg/m3.
• Perma Plast PC – 300 is recommended in hot weather concreting where workability retention over long periods is required.
• Perma Plast PC – 300 is recommended in marine structures, pile foundations, bridge girders, caissons and such structures where quality of concrete is of prime importance.
• Perma Plast PC – 300 is also recommended where very high initial and ultimate strengths are expected.
• Perma Plast PC – 300 is also recommended for use with Microsilica.
• Perma Plast PC – 300 is recommended in hot weather concreting.

• Ne aggregates.owing concrete, with most kinds of aggregates and varying  Hyper plasticizing action of this product produces free
• Perma Plast PC – 300 maintains the workability over long periods.
• exural strengths and exhibits excellent resistance to chloride and sulphide attacks on concrete. Perma Plast PC – 300 helps in production of high quality concrete which exhibits superior compressive, tensile and
• y ash / slag cements and Microsillica. Perma Plast PC – 300 is compatible with all types of cements including puzzalonic,
• Perma Plast PC – 300 is specially suggested in all high strength concrete and in construction of marine structures, pile foundations and bridge girders.
• nish concrete. Perma Plast PC – 300 enables production of dense impermeable and fair
• Perma Plast PC – 300 enables concreting during hot weather and in the areas lying in high temperature zones.

Composition:

• Perma Plast PC – 300 is based on Poly Carboxylic ether and hyper plasticising synthetic polymers carefully selected to give superior initial and ultimate results.

Available Packing:

• Perma Plast PC – 300 is available in 25 kg, 100 kg, 200 kg HDPE drum.

Shelf Life:

• Perma Plast PC – 300 has a shelf life of 12 months if stored in manufacturer’s original packing in a cool and dry place away from moisture and heat.

Perma Plast Super – 280

• High range hyper plasticising superior quality admixture for high quality concrete

Description:

• Perma Plast Super-280 is based on hyper plasticising sulphonated synthetic polymers. It may be dispensed at dosages varying between 0.5 to 2 percent by weight of cement depending upon type of concrete required.
• Perma – Plast  Super-280 is recommended in all high grade concrete which has a cement content more than of over 375 kgs/ M3
• Perma – Plast  Super-280 is recommended in hot weather concreting where workability retention over long periods is required. 
• Perma – Plast  Super-280 is recommended in marine structures, pile foundations, bridge girders, caissons and such structures where  quality of concrete is of prime importance.
• Perma – Plast  Super-280 is also recommended where very high initial and ultimate strengths are expected. 
• Perma – Plast  Super-280 is also recommended for use with Microsilica. 

Advantages:

• Hyper plasticising action of this product produces free flowing concrete, with most kinds of aggregates and varying fine aggregates.
• Perma – Plast  Super-280 maintains the workability over long periods.
• Perma – Plast  Super-280 helps in production of high quality concrete which exhibits superior compressive, tensile and flexural strengths  and exhibits excellent resistance to chloride and sulphide attacks on concrete.
• Perma – Plast  Super-280  is compatible with all types of cements including puzzolanic and fly ash / slag cements and Microsilica. 
• Perma – Plast  Super-280  is specially suggested in all high strength concrete and in construction of marine structures, pile foundations and bridge girders.
• Perma – Plast  Super-280 enables production of dense impermeable and fair finish concrete.

• Perma Plast Super-280 is based on hyper plasticising sulphonated synthetic polymers carefully selected to give superior initial and ultimate results.

Health and Safety:

• Perma Plast Super-280 is not a health hazard or fire risk. Spillages should be washed immediately to avoid possibilities of slipping.

Available Packing:

• Perma Plast Super-280 is available in 30 kg, 120 kg and 250 kg HDPE drums.

Shelf Life:

• Perma Plast Super-280 has a shelf life of 24 months if stored in manufacturer’s original drums. Perma Plast Super-280 should be stored in a place where temperature does not drop below + 5°C. If the product is frozen, thaw at+30°C and agitate until completely reconstituted. Shake well before use

Perma Plast Super – 223

• A high range, low dosage, super plasticising admixture for slump retention

Description:

• Perma Plast Super-223 is a multi component liquid admixture based on high molecular weight polymers and napthalene formaldehyde to produce self-compacting flowing concrete and to produce high early strength concrete.

Primary Uses:

• For the production of high workability concrete where heavily congested reinforcements exist or poor access is available. To produce flowing self compacting concrete which requires minimal labour to place. For the production of high strength, high workability concrete. Particularly beneficially in hot climatic conditions.

Directions for Use:

• Perma Plast Super-223 should be added to the mix during the cycle at the same time as water or aggregates. Never add Perma Plast Super-223 to dry cement.

Dosage:

• Field trials should be carried out with the given cement and aggregates to arrive at optimum dosages for the desired property to be achieved. However for guidance we specify a range of 0.4 to 1.5 percent by weight of cement for initiating trials based on type of concrete required.

Available Packing:

• Perma Plast Super-223 is available in 30 kg, 120 kg and 250 kg drum

Shelf Life:

• Perma Plast Super-223 has a shelf life of 24 months from the date of manufacture if stored in a cool, dry place in original packing.

Description:

• Perma Plast PC – 600 is based on hyper plasticising poly carboxylic ether. It may be dispensed at dosages varying between 0.5 to 2 percent by weight of cement depending upon type of concrete required.

• Perma Plast PC – 600 is recommended in all high grade concrete which has a cement content of over 400 kg/m3.
• Perma Plast PC – 600 is recommended in hot weather concreting where workability retention over long periods is required.
• Perma Plast PC – 600 is recommended in marine structures, pile foundations; bridge girders, caissons, high rise structures and such structures where quality of concrete is of prime importance.
• Perma Plast PC – 600 is also recommended where very high initial and ultimate strengths are expected.

Advantages:

• Hyper plasticizing action of this product produces free flowing concrete with most kinds of aggregates and varying fine aggregates.
• Perma Plast PC – 600 maintains the workability over long periods.
• Perma Plast PC – 600 helps in production of high quality concrete which exhibits superior compressive, tensile and flexural strengths and exhibits excellent resistance to chloride and sulphide attacks on concrete.
• Perma Plast PC – 600 is compatible with all types of cements including pozzolanic and fly ash / slag cements.
• Perma Plast PC – 600 is specially suggested in all high strength concrete and in construction of marine structures, pile foundations and bridge girders.
• Perma Plast PC -600 enables production of dense impermeable and fair finish concrete.

Available Packing :

• Perma Plast PC – 600 is available in 200 kg Drum.

Perma Plast Super – 230

• High range hyper plasticising superior quality admixture for high quality concrete

Description:

• Perma Plast Super – 230 is based on hyper plasticising sulphonated synthetic polymers. It may be dispensed at dosages varying between 0.5 to 2 percent by weight of cement depending upon type of concrete required.

• Perma Plast Super – 230 is recommended in all high grades concrete.
• Perma Plast Super – 230 is recommended in hot weather concreting where workability retention over long periods is required.
• Perma Plast Super – 230 is recommended in marine structures, pile foundations, bridge girders, caissons and such structures where quality of concrete is of prime importance.
• Perma Plast Super – 230 is also recommended where very high initial and ultimate strengths are expected.
• Pack size:250 kg available

Advantages:

• Aggregates.owing concrete, with most kinds of aggregates and varying Hyper plasticising action of this product produces 
• Perma Plast Super – 230 maintains the workability over long periods.
• exural strengths and exhibits excellent resistance to chloride and sulphide attacks on concrete.Perma Plast Super – 230 helps in production of high quality concrete which exhibits superior compressive, tensile and 
• Yash / slag cements.Perma Plast Super – 230 is compatible with all types of cements including pozzolanic and 
• Perma Plast Super – 230 is specially suggested in all high strength concrete and in construction of marine structures, pile foundations and bridge girders.
• Nish concrete.Perma Plast Super – 230 enables production of dense impermeable and fair 

Available Packing:

• Perma Plast Super – 230 is available in 30 kg and 250 kg drum.

• Area to be tiled should be free from dust dirt, oil, grease and any such material which hinder bonding.
• Prepare the surface area by cleaning chipping or wire brushing to obtain a sound surface.
• Wet the surface to be tiled and the contact surface of the tile.
• Metal or glass surfaces do not require wetting.
• Take Elast- o -Fix PU directly from the can and apply the material evenly on the surface to be tiled and on back of the tile with a notch trowel.
• Press the tile on the surface firmly.
• Ensure that the bed thickness of the adhesive is not less than one mm.
• Tile joints can be grouted with appropriate tile grouting material 72 hours after fixing the tiles.

Perma Plast PC – 404 is based on hyper plasticising synthetic polymers. It may be dispensed at dosages varying between 0.5 to 2 percent by weight of cement depending upon type of concrete required.

• Perma Plast PC – 404 is recommended in all high grade concrete which has a cement content of over 400 kg/m3.
• Perma Plast PC – 404 help to control of bleed resulting from poor grading of fine aggregate in the concrete mix.
• Perma Plast PC – 404 is of use in hot weather concreting and in concreting works in areas lying high temperature zones.
• Perma Plast PC – 404 is recommended in hot weather concreting where workability retention over long periods is required.
• Perma Plast PC – 404 is recommended in marine structures, pile foundations, bridge girders, caissons, high rise structures and such structures where quality of concrete is of prime importance.
• Perma Plast PC – 404 is also recommended where very high initial and ultimate strengths are expected.

Advantages:

• Hyper plasticizing action of this product produces free flowing concrete with most kinds of aggregates and varying fine aggregates.
• Perma Plast PC – 404 maintains the workability over long periods.
• Perma Plast PC – 404 helps in production of high quality concrete which exhibits superior compressive, tensile and flexural strengths and exhibits excellent resistance to chloride and sulphide attacks on concrete.
• Perma Plast PC – 404 is compatible with all types of cements including pozzolanic and fly ash / slag cements.
• Perma Plast PC – 404 is specially suggested in all high strength concrete and in construction of marine structures, pile foundations and bridge girders.
• Perma Plast PC 404 enables production of dense impermeable and fair finish concrete.
• Perma Plast PC – 404 helps to control segregation and bleed in concrete resulting from poor fine aggregate grading.

Directions for Use:

• Perma Plast PC – 404 should be added to the mix along with water. Addition of plasticizers to the dry mix or dry cement should be avoided. During long transits of concrete fifty percent of the recommended dosage of Perma Plast PC – 404 can be added at the batching plant and the remaining fifty percent at site just before pouring.

Composition:

• Perma Plast PC – 404 is based on hyper plasticizing poly carboxylic ether polymers.

Available Packing:

• Perma Plast PC – 404 is available in 25 kg, 100 kg and 200 kg HDPE drum.

Shelf Life:

• Perma Plast PC 404 has a shelf life of 12 months from the date of manufacturers original drums. Perma Plast PC – 404 should be stored in a place where temperature does not drop below + 5°C. If the product is frozen, thaw at+ 30°C and agitate until completely reconstituted. Shake well before use.

Perma Plast PC – 101

• High range hyper plasticising superior quality admixture for high quality concrete based on poly carboxylic ethers

Description:

• Perma Plast PC – 101 is based on hyper plasticising Poly Carboxylic Ethers. It may be dispensed at dosages varying between 0.4 to 3 percent by weight of cement depending upon type of concrete required.

• Perma Plast PC – 101 is recommended in all high grade concrete which has a cement content of over 350 kg/m3.
• Perma Plast PC – 101 is recommended in hot weather concreting where workability retention over long periods is required.
• Perma Plast PC – 101 is recommended in pile foundations, bridge girders, caissons, high rise structures and such structures where quality of concrete is of prime importance.
• Perma Plast PC – 101 is also recommended where very high initial and ultimate strengths are expected.

Advantages:

• Hyper plasticizing action of this product produces free flowing concrete, with most kinds of aggregates and varying fine aggregates.
• Perma Plast PC – 101 maintains the workability over long periods.
• Perma Plast PC – 101 helps in production of high quality concrete which exhibits superior compressive, tensile and flexural strengths and exhibits excellent resistance to chloride and sulphide attacks on concrete.
• Perma Plast PC – 101 is compatible with all types of cements including pozzolanic and fly ash / slag cements.
• Perma Plast PC – 101 is specially suggested in all high strength concrete and in construction of marine structures, pile foundations and bridge girders.
• Perma Plast PC – 101 enables production of dense impermeable and fair finish concrete.

Directions for Use:

• Perma Plast PC – 101 should be added to the mix along with water. Addition of plasticizers to the dry mix or dry cement should be avoided. During long transits of concrete fifty percent of the recommended dosage of Perma Plast PC – 101 can be added at the batching plant and the remaining fifty percent at site just before pouring.

Dosage:

• Field trials should be conducted to determine the optimum addition rates of Perma Plast PC – 101. However a dosage of 0.4 to 3 percent by weight of cement, depending upon type of concrete required, is recommended.

Composition:

• Perma Plast PC – 101 is based on hyper plasticizing Poly Carboxylic Ethers.

Health and Safety:

• Perma Plast PC – 101 is not a health hazard or fire risk. Spillages should be washed immediately to avoid possibilities of slipping.

Available Packing:

• Perma Plast PC – 101 is available in 25kg, 100kg and 200kg drum.

Shelf Life:

• Perma Plast PC – 101 has a shelf life of 24 months if stored in manufacturer’s original drums. Perma Plast PC – 101 should be stored in place where temperature does not drop below + 5°C. If the product is frozen, thaw at + 30°C and agitate until completely reconstituted. Shake well before use.

Description:

• Perma Plast PC – 100 is based on hyper plasticising Poly Carboxylic Ethers. It may be dispensed at dosages varying between 0.4 to 3 percent by weight of cement depending upon type of concrete required.

• Perma Plast PC – 100 is recommended in all high grade concrete which has a cement content of over 350 kg/m3.
• Perma Plast PC – 100 is recommended in hot weather concreting where workability retention over long periods is required.
• Perma Plast PC – 100 is recommended in pile foundations, bridge girders, caissons, high rise structures and such structures where quality of concrete is of prime importance.
• Perma Plast PC – 100 is also recommended where very high initial and ultimate strengths are expected.

Perma Plast PC-405

• A polycarboxylic ether based high range plasticising and workability retention admixture for high quality concrete.

Description:

• Perma Plast PC – 405 is based on hyper plasticising synthetic polymers. It may be dispensed at dosages varying between 0.5 to 2 percent by weight of cement depending upon type of concrete required.

• Perma Plast PC – 405 is recommended in all high grade concrete which has a cement content of over 400 kg/m3.
• Perma Plast PC – 405 help to control of bleed resulting from poor grading of fine aggregate in the concrete mix.
• Perma Plast PC – 405 is of use in hot weather concreting and in concreting works in areas lying high temperature zones.
• Perma Plast PC – 405 is recommended in hot weather concreting where workability retention over long periods is required.
• Perma Plast PC – 405 is recommended in marine structures, pile foundations, bridge girders, caissons, high rise structures and such structures where quality of concrete is of prime importance.
• Perma Plast PC – 405 is also recommended where very high initial and ultimate strengths are expected.

• Hyper plasticizing action of this product produces free flowing concrete with most kinds of aggregates and varying fine aggregates.
• Perma Plast PC – 405 maintains the workability over long periods.
• Perma Plast PC – 405 helps in production of high quality concrete which exhibits superior compressive, tensile and flexural strengths and exhibits excellent resistance to chloride and sulphide attacks on concrete.
• Perma Plast PC – 405 is compatible with all types of cements including pozzolanic and fly ash / slag cements.
• Perma Plast PC – 405 is specially suggested in all high strength concrete and in construction of marine structures, pile foundations and bridge girders.
• Perma Plast PC 405 enables production of dense impermeable and fair finish concrete.
• Perma Plast PC – 405 helps to control segregation and bleed in concrete resulting from poor fine aggregate grading.

Available Packing :

• Perma Plast PC – 405 is available in 25 kg, 100 kg and 200 kg HDPE drum.

Description:

• Perma Plast Super -210 is a high range, low dosage, super plasticizing admixture for slump retention. It is a product based on refined naphthalene formaldehyde.

Primary Uses:

• To produce self- compacting flowing concrete. To produce high early strength concrete for delayed slump retention and for long over hauls. Ideally suited for commercial RMC plants and concrete made with crushed sand.

Typical Applications:

• For the production of high workability concrete where heavily congested reinforcements exist or poor access is available. To produce flowing self compacting concrete which requires minimal labour to place. For the production of high strength, high workability concrete. Particularly beneficial in hot climatic conditions and in ready mix concrete.

Action:

• Perma Plast Super- 210 dramatically increases the workability of concrete mixes by its powerful deflocculating and dispersing effect on the cement particles. This increase in workability can be utilized to produce high workability concrete or to enable significant reductions in free water content.

Dosage:

• Field trials should be conducted to determine the optimum addition rates of Perma Plast Super- 210. However a dosage of 300 gms to 700 gms is recommended per 50 kg bag of cement depending upon requirements.

Available Packing:

• Perma Plast Super -210 is available in 30 kg, 120 Kg & 250 kg HDPE Drum.

Shelf Life:

• Perma Plast Super -210 has a shelf life of 24 months from the date of manufacturing if stored in a cool and dry place in original packing.

Perma Plast PC 401 is based on hyper plasticizing sulphonated synthetic polymers. The Perma Plast PC 401 may be dispensed at dosages varying between 0.5 to 2 percent by weight of cement depending upon type of concrete required. We are manufacturing, exporting and supplying the best quality Perma Plast PC 401 across the world. Our range of Perma Plast PC 401 can be availed at the most competitive price range. 

Primary Uses :

• Perma Plast PC 401 is recommended in all high grade concrete which has a cement content of over 400kg/m3.
• Perma Plast PC 401 is recommended in hot weather concreting where workability retention over long periods is required.
• Perma Plast PC 401 is recommended in marine structures, pile foundations, bridge girders, caissons high rise structures and such structures are expected.
• Perma Plast PC 401 is also recommended where very high initial and ultimate strengths are expected.

• In pre-stressed concrete.
• In areas of congested reinforcement where high workability is beneficial.
• In pre-cast concrete manufacturing.
• In concrete brick and block manufacturing.
• In hot weather concreting to extend workability.

• Increase workability – Significantly improves the workability therefore ease of placing.
• Improves the cohesive properties of the concrete helping to reduce segregation and bleeding.
• Reduces water demand – Allows water reduction in the region of 10% to be achieved while maintaining workability thereby Increasing strength, durability and impermeability.
• Enables economies in the mix designs to be achieved therefore saving cement

• Perma Plast should be added to the concrete mix during the mixing cycle at the same time as the water. Never add Perma Plast to dry cement.

• Perma Plast is a powerful plasticiser which disperses and deflocculates the cement particles within a concrete mix. It can be used to improve workability without the addition of extra water or to allow reductions in free water content of the concrete mix.

• A liquid admixture based upon refined napthalene formaldehyde and ligno sulphonate blends.

• Retardation of initial set.
• Increase in air entrainment.
• Increase in workability. Provided concrete is properly cured, the ultimate strength of the concrete will not be adversely affected and will generally be higher than that of normal concrete.

• Perma Plast can be used with all types of Portland cement including Sulphate resisting. For use with other special cements, contact your nearest Perma technical Office, or distributor. Perma Plast should not be pre-mixed with other admixtures. If other admixtures are to be used in concrete containing Perma Plast they must be dispensed separately.

• Perma Plast is available in 10 kg, 25 kg, 100 kg and 210 kg drum.

Description:

Perma Plast Super 280 B  is a high range, low dosage, super plasticising admixture for slump retention. It is a product based on refined naphthalene formaldehyde and ligno sulfonate blends.

Primary Uses:
To produce self-compacting flowing concrete. To produce high early strength concrete for delayed slump retention and for long overhauls. Ideally suited for commercial RMC plants and concrete made with crushed sand.

Typical Applications:
For the production of high workability concrete where heavily congested reinforcement exist or poor access is available. To produce flowing self Compacting concrete which requires minimal labour to place. For the production of high strength, high workability concrete. Particularly beneficial in hot climatic conditions and in ready mix concrete. It is based on naphthalene formaldehyde blends.

Action:
Perma Plast Super 280 B  dramatically increases the workability of concrete mixes by its powerful deflocculating and dispersing effect on the cement particles. This increase in workability can be utilized to produce high workability concrete or to enable significant reductions in free water content.

Available Packing:
Perma Plast Super 280 B  is available in 30 kg, 120 Kg & 250 Kg HDPE Drum.