Dubans Construction Chemical

• Grouting heavy machine foundations which are subjected to huge dynamic loads.
• Grouting underneath base plates of machines.
• Grouting of columns / stanchion foundations.
• Grouting of crane rails, anchor bolts, dowel bars etc.

• High early and ultimate strength : Perma Grout – 60 achieves a compressive strength of 200 kg/cm2 in one day, 350 kgs/cm2 in 3 days, 450 kgs/cm2 in 7 days & 600 kgs/cm2 in 28 days.
• Non shrink and expansion : Perma Grout – 60 is expansive. It exhibits an expansion of about 4% in plastic state and 0.2% in hardened state. Hence the chances of shrinkage of grouting material do not arise.
• Free flowing and self levelling : Perma Grout – 60 is free flowing and self levelling: It occupies voids and recesses without the need of any tamping or vibration. The product can also be pumped.
• Safety in use : Perma Grout – 60 is free from any added chlorides, sulphates, nitrates and any ferrous materials.

• Clean the foundation surfaces to be grouted so that they are free from dust, dirt, oil, grease, curing compound, paint etc.
• Make the surface wet and avoid stagnation of water in the recesses.
• Mix Perma Grout - 60 with water as per the ratios mentioned in the properties to form a smooth consistency mortar or slurry.
• Lower the water content higher will be the strength.
• Pour Perma Grout - 60 mortar or slurry in the pocket or recess to be grouted. After initial hardening cure by placing wet hessian over it.

• Perma Grout - 60 is available in 10 kg, 25 kg and 50 kg lined HDPE sack.

We cater for the global market with highly efficient Aluminium Polynet Butyl Tape. We are hailing as the chief Manufacturer, Exporter, and Supplier of Perma Aluminium Polynet Butyl from Mumbai, India. This chemical is endowed with excellent waterproofing property, which makes it stand out among the lot. It is deemed ideal for the construction industry. To avail it minimal prices, contact us!

Primary Use

• Perma Aluminium Polynet Butyl Tape is used for covering all cracks, Construction joints, bends, Corners and joints of non homogenous materials. Perma Alumunium Polynet Butyl Tape is used for joint sealing of the metallic and non metallic roofing such as aluminium, zinc asbestos sheeting and the roofs of buses.
• Perma Alumunium Polynet Butyl tape can be used for sealing all joints in timber framed houses.
• It is used for sealing all the corner joints and the joints between the horizontal and vertical RCC surfaces of the sunken slabs of toilets and bathrooms after water proofing. It is also used for covering of all cut outs and pipe joints in the walls.
• This tape is used for covering The insulated air conditioning ducts and exposed Piping work to prevent energy loss.
• Perma Alumunium Polynet Butyl tape can be used to cover the ends of corrugated sheets in roofing & Sealing the joints around turbovents.

Advantages

• Perma Alumunium Polynet Butyl tape is resistant to hot and cold temperature. It withstands 90o C Without yielding.
• Perma Alumunium Polynet Butyl tape is totally weather-proof. It insulates and makes the taped area waterproof and airtight.
• It has good adhesion to all types of surfaces.

Perma Paver Paint is a single component solvent based liquid material available in selected colors, used for coating concrete floors in heavy duty applications, paver tiles interlocking blocks etc. In parking lost walkways etc. The product is based on high performance polymers specially developed for heavy traffic applications.

Primary Uses :

• Perma Paver Paints is used for coating paver tiles interlocking blocks and concrete floors and gangways in the walkways and parking lots
• Perma paver paint can be used for coating parking areas in the shopping malls and supermarkets
• As a contrasting colour markings on the walkways and in joggers parks
• Perma Paver Paint is used for coating swimming pools, fountains, water bodies and water tanks
• Perma Paver Paint is also used for coating tennis/ badminton / Squash course
• Avialble Pack Size:30kg 

Advantages :

• Perma Paver Paint is single component hence can be directly brush applied form the can itself
• Perma Paver Paint is abrasion resistant hence takes foot traffic as well as wheel traffic easily

Perma Block Fix is a polymer modified adhesive mortar specially designed for thin bed fixing of masonry blocks of various kind including light weight blocks. This product helps in block fixing with thin water tight joints which are strong and give better bonding of the blocks in the masonry.

Advantages :

• Perma Block Fix is a ready to use material which requires just addition water on site to make a ready to use mortar.
• Because of thin bed block fixing one can get extra strong bonding of the blocks and helps in achieving good plumb.
• Perma Block Fix joints are waterproof hence there is no chance of rising dampness in the masonry.
• No Soaking of the block required. No curing required.

RTF is a three component epoxy resin based mortar used for filling joints between acid proof tiles in the industrial floors. RTF provides aesthetic germ proof, permanent, hard wearing, chemical resistant joints for industrial foor tiles. It provides a smooth, hygienic and dust free floor tile joints.

Primary Uses :

• For grouting industrial floor joints,and joints between kota stones, mandana stones and joints of any such acid proof flooring materials where strength and chemical resistant properties are expected.

Typical Applications :

• RTF is designed for use in the floor tile or stone joints in: operation theatres, agricultur a bluilding, factories, laboratories, bakeries, super markets, showrooms, butting plants, power station, warehouse, breweries, garages, machine shops, chemical plants, dairies, hospitals, refineries, subway, surgical treatment plants and many other industrial and commercial applications.

Advantages :

• High compressive, flexurl and tensile strengths in excess of concrete.
• Available in range of attractive colours-Brown, Green, Blue, Grey, etc.
• Chemical resistant andwaterproof.
• Hygienic and non-dusting.
• Easy to use, easy to clean.
• Epoxy based, supplied in pre-weighted units.
• Will not support bacterial growth.
• Pack size: 25 Kg and 50 kg Sacks available

• Make sure that the tiles or the stones joints operation is taken up atleast 72 hours after laying of the tiles or the Stone.
• The joints should be dry, clean and free from cement mortar, adhesive, dust, grease etc.

• Apply masking tape on the edges of the tiles or to the stones joints are to be grouted in one direction.
• Clean the joints using a blower.
• Mix the base and hardener components and add the filler and mix to get a uniform consistency free flowing mortar.
• Pour the mortar with a mug in the joints taking care to see that the mortar does not fall on the tiles.
• Gently tap the filled joints to evenly fill the joints till a sheen appears on the joints and leave to cure over night.
• Next day apply the masking tapes in the perpendicular direction and fill joints as explained above.

Perma Universal Tile Adhesive (UTA) is a cementitious material in powder form composed of Cement, Sand and polymers which only needs on site addition of water to make a mortar which is used for fixing tiles over any cementitious surface or on existing mosaic tiles without removing them. Perma Universal Tile Adhesive is also used for fixing tiles on difficult surfaces.

Primary Use :

• Perma Universal Tile Adhesive is mainly used for fixing glazed, ceramic, terracotta, vitreous, marble and granite tiles on Cementitious surface or on existing mosaic or ceramic floor tiles without removing them or hacking them. Perma Universal Tile Adhesive is also used for tiling on difficult vertical cementitious surfaces and in cases where the weight of the tile is more than the normal ones. Perma Universal Tile Adhesive can also be used for plaster crack repairs and paver joint grouting.

Guide of Application :

• Ensure that the surface to be tiled is clean and free from dust, dirt, grease etc. Mix Perma Universal Tile Adhesive with clean water in the proportion of 3.5 volumes of powder to 1 volume of water. Mix till a uniform consistency smooth mortar is obtained. Leave the paste for ten minutes in the pan for the entrapped air if any to escape and remix the mortar. Apply the mortar uniformly on to the surface to be tiled as well as on the back of the tile and press the tile in position. For increasing the coverage of the material notch trowel technique can be used. While using Perma Universal Tile Adhesive wetting of the tiles or the surface to be tiled or curing is not required. However wetting of tiles help in removing the dust particles. Fill tile joints after 24 hours of tile laying.

Advantages

• Can be used for fixing tile over tile.

• No need to break or hack the existing tiles.

• No wetting of tiles required before fixing.

• No wetting of surface to be tiled.

• Makes the tiled area waterproof.

• Holds the tile even at high temperatures.

• Single component hence easy to use.

• Withstands temperatures up to 200 ° C

Available Packing :

• Perma Universal Tile Adhesive is available in 10 Kg, 20 kg, 25 Kg and 50 kg HDPE bags.

• Perma Paver Coat penetrates the capillary structure and provides a tough and clear protection. 
• Perma- . Paver Coat is UV resistant.
• Paver Coat on curing forms a glossy film. 
• Paver -Coat is resistant to oil , grease and stains. 
• Paver Coat is free from water. Paver Coat can be applied by even unskilled laborers.

• 25 Ltr & 100 Ltr available

Quick Setting Cement Grout is a quick setting cement and mortar supplied in dry powder form. Quick Setting Cement Grout constitutes a blend of cement grades and chemical set control agents. The product needs only onsite addition of required amount of water just before the use of Quick Setting Cement Grout. Our Quick Setting Cement Grout is very useful for plugging. 

Primary Uses :

• Heavy Duty Plugging : Quick Setting Cement Grout is suitable for plugging of pre-stressing/post tensioning holes or depressions in the pipes, sleepers or girders.
• Repairs of Buildings : Repairs to corners and edges of high strength concrete structures and general repairs in the building industry.
• Plugging Running Leaks : Quick Setting Cement Grout is used to stop leaks from water tanks and leaky basements because of its quick setting property.
• Sealing Joints : Quick Setting Cement Grout can be effectively used for filling joints, pointing brick stone masonry and water proofing.

Advantages :

• Easy to Use : Quick Setting Cement Grout is supplied in powder form. It only needs addition of water before use.
• Rapid Setting : "Rapid setting property of this product makes it useful in stopping running water.
• High strength : Quick Setting Cement Grout hardens to a high strength, which is comparable to the strength of the member under repair in hours only.
• Compatibility : Quick Setting Cement Grout is highly compatible for use with all cementitious materials, stone, brick, steel etc.

Directions for Use :

• Clean the surface to be treated as per normal surface preparation, methods for concrete removing, loose particles, deleterious materials etc.
• Damp down the surface.
• Mix Quick Setting Cement Grout and water in the proportion of 3 volumes of powder to 1volume of water and mix to obtain a stiff consistency paste.
• Press in position or trowel the paste to the finis

• Packaging size :10 kgs and 25 kgs available

Health and Safety

• Perma Plug is generally nontoxic, but it is advised that workers use gloves and avoid contact with skin. Accidental splashes of the powder on skin or eyes should be immediately washed with plenty of clean water. In the event of prolonged irritation seek medical advice.